Pneumatic coil nailer for flat wire...
Pneumatic coil nailer for flat wire welded coil nails (shank diameter 2.1-2.5 mm). TRUSTY Line.
Suitable nails lengths: from 25 to 57 mm.
Pneumatic coil nailer for wire welded coil nails from 25 to 57 mm (C60 – 2-¼”).
The body tool is in die-cast aluminum and is taper in shape.
The head is grey-pearl. Two side labels protect the staple gun from contact with rough surfaces.
An adjustable exhaust deflector with muffler for noise reduction diverts air away from the operator.
All internal parts that are subject to wear are made of high quality materials and have undergone a heat treatment for strength and high durability.
The nailer can fire only if the contact safety lever is pressed on the material to be nailed. This nail gun also features the possibility to change the depth of drive, simply by turning the setting knurled knob placed on the side of the air tool.
The air inlet connection is ¼”gas.
A neoprene protection has been placed on the handle of the nail gun, in order to ensure an excellent handgrip.
Depending on the firing mode, the trigger can be either black or orange, and it is supplied together with a drip oiler, a male nipple for quick coupler “Germany type”, and a set of hex keys.
Completing the nailer kit, the operation and maintenance manual, the EC certificate of conformity, the exploded view of spare parts and a warranty certificate of the nail gun.
|Pressione di Esercizio (bar)||4,9 - 7,8|
|Lunghezza chiodo||da 25 a 57|
|Sezione Filo (mm)||da 2,1 a 2,5|