Pneumatic brad nailer for C series...
Pneumatic brad nailer for C series brads. TRUSTY Line.
Suitable brads lengths: 19-25-32-38-45-50-57-64 mm.
This pneumatic brad nailer is suitable for brads having wire size 1.4x1.6 mm.
The body is in aluminum and the magazine is made of aluminum and high-resistance plastic material.
Tool features: the nose of the brad nailer operates as a contact safety lever, which prevents the tool from actuating when the magazine is nearly empty.
The finish nailer also allows the possibility to change the depth of drive simply by adjusting the setting knurled knob placed on the side of the air tool.
An adjustable exhaust with muffler for firing noise reduction diverts air away from the operator.
Side rubber labels protect the tool from contact with rough surfaces as well as from damages or wear.
The magazine contains a hex key to drive screws and two rubber pads for protecting workpiece from marring by the driver tip.
The body of the brad nailer is grey-pearl and both the magazine and the neoprene handle are black.
This model is lightweight, manageable and especially balanced.
|Pressione di Esercizio (bar)||4,8 - 7,6|
|Lunghezza groppino||19 - 25 - 32 - 38 - 45 - 50 - 57 - 64|
|Sezione Filo (mm)||1,60 x 1,40 ( Ga. 16 )|