The model AC1024G2 is a small...
The model AC1024G2 is a small oil-free air compressor, approximately 80 cm high, 50 cm long, 53 cm wide and weighing about 37 kg.
Despite the weight of the AC1024G2 compressor does not allow it to be lifted, thanks to its frame mounted on wheels, it is however easily transportable.
It has a tank capacity of 24 litres and reaches a maximum pressure of 10 bar.
It has a 2.2 KW single-phase motor and works with 230 volt/50 Hz alternating current.
The compressor is suitable for works requiring medium-low and continuous pressure – such as painting – as well as for pneumatic equipment such as staplers and nailers, even those of large size.
The thermal control system prevents the compressor from operating in case of overheating of the engine.
Particular consideration should be given to the cylinders, which are made of ceramic-coated aluminum, and to the two self-lubricant pistons, which guarantee slow wear for longer life.
The compressor is obviously equipped with pressure switch and pressure gauge and has a capacity of 330 litres/minute, with a yield of 200 litres/minute at 5 bar.
This model can reach a maximum operating pressure of 8 bar, with a noise level of 80 decibels.
It is suitable for roofing works and for the installation of boards even with two nailers at the same time.
|Aria aspirata (litri/minuto)||330|
|Pressione massima (BAR/PSI)||10/145|
|Giri (al minuto)||1400|
|Pressione sonora (dB)||80|
|Tensione frequenza di alimentazione (volt/hertz)||230/50|