Pneumatic nailer for C8 series brads...
Pneumatic nailer for C8 series brads and P8 series pins. TRUSTY Line.
Suitable brads and pins lengths: 15-20-25-30-35-40-45 mm.
The mini tip & pin nailer is supplied inside a plastic carrying case together with an instruction manual – including the exploded view of all spare parts – a drip oiler, a male nipple for quick coupler “Germany type”, and a 3 mm hex key.
Tool features: 1) metallic grey die-cast aluminum body with a rubber label on each side, aimed at protecting the nailer from contact with rough surfaces; 2) rear exhaust; 3) the magazine is made of resistant plastic material.
The nose of the nailer operates as a contact safety lever, which prevents the tool from actuating when the magazine is nearly empty.
The nail gun also allows the possibility to change the depth of drive simply by adjusting the setting knurled knob placed on the side of the air tool.
This model is suitable for brads having wire size 0.84 mm, in lengths from 15 to 45 mm.
The air inlet connection is ¼’’.
The color of the trigger identifies the firing mode: orange for the single-fire and black for the contact fire.
The operator may consider inserting a rubber pad on the nose to prevent the nailer from denting worktop.
|Pressione di Esercizio (bar)||4,1 - 6,9|
|Lunghezza spillo||15 - 20 - 25 - 30 - 35 - 40 - 45|
|Lunghezza groppino||15 - 20 - 25 - 30 - 35 - 40 - 45|
|Sezione Filo (mm)||0,84 ( Ga. 21 )|