Prodotti visti


Nuovo prodotto

Pneumatic combi nailer for C6 series mini-micro brads and P6 series mini pins. ZT Line.

Suitable fasteners lengths: 12-15-18-22-25-30-35 mm.

Maggiori dettagli


  • Pneumatic combi nailer firing both C6 series brads and P6 series pin (having wire size 0.6 mm).

    The nailer is supplied in a plastic carrying case together with an oiler and lubricating fluid, a ¼” male nipple for quick coupler “Germany type”, and descriptive technical documentation.

    Tool features: a contact safety lever incorporated in the nose plate, an adjustable exhaust deflector through which it is possible to regulate and orient the stream of air coming out from the head of the machine tool.

    Mode of operation: connect the nailer to a source of compressed air at an operating pressure of 5 ÷ 6.5 bar; pull the specific lever to open the magazine and then pull back the sliding magazine.

    Insert a strip of brads or pins, so that their tips be in contact with the base of the magazine and their heads be in the specific groove. If the brad does not fit in the magazine, it means that the length is wrong. Otherwise, close the sliding magazine and the nail gun is ready for use.

  • Altezza (mm) 175
    Lunghezza (mm) 60
    Larghezza (mm) 200
    Peso (kg) 0.75
    Pressione di Esercizio (bar) 4-7
    Lunghezza groppino 12-15-18-22-25-30-35
    Sezione Filo (mm) 0.65


7 Products in the same category: